Precision machining , Beta titanium pipe
futaku
FUTA-Q,Ltd.
HOME > Certification > Environmental report 2013
Environmental report 2013
Environmental report 2013
update :
The Message from the President
Not only Japan but the whole world has been surrounded by the change of politics and economy, and the environmental change has caused numerous disasters everywhere on the earth.
We seriously strive to reduce environmental burden and leave the comfortable global environment for future generations through daily activities.
I herein inform you of the result and status of environmental preservation activity in 2013.
Ryozo Futaku
The President of FUTA・Q, Ltd.
June 2th, 2014
The content and the achievement of environmental preservation activities in 2013
[ Headquaters ]
| Goals for environment improvement plan | Specific policies | Target value | Result value | Achievement rate | Evaluation |
|---|---|---|---|---|---|
| 1 “Resource saving” Electricity(electricity & oil) CO2 reduction (2% reduction from the result in 2012) Unit (t-CO2.) |
1. Turning off unnecessary lights 2. Turning off lights at recess 3. Controlling with electricity consumption management system |
15.59 | 15.28 | 102.0% | A |
[ Kyoto Plant ]
| Goals for environment improvement plan | Specific policies | Target value | Result value | Achievement rate | Evaluation |
|---|---|---|---|---|---|
| 1 “Resource saving” Electricity(electricity & oil) CO2 reduction (2% reduction from the average emission from April to June in 2013) Unit (t-CO2.) |
1. Turning off unnecessary lights 2. Turning off lights at recess 3. Controlling with electricity consumption management system |
39.54 | 44.02 | 89.8% | C |
[ Yagi Plant ]
| Goals for environment improvement plan | Specific policies | Target value | Result value | Achievement rate | Evaluation |
|---|---|---|---|---|---|
| 1 “Resource saving” Electricity(electricity & oil) CO2 reduction (2% reduction from the result in 2012) Unit (t-CO2.) |
1. Turning off unnecessary lights 2. Turning off lights at recess 3. Controlling with electricity consumption management system |
268.13 | 297.76 | 90.0% | B |
| 2 “Resource Saving” 5% increase in the effective use rate of materials (Comparison with the result in 2012: material cost/stock amount of money at the end of month) Unit(%) |
1. Reducing the amount of discarded defective components in manufacturing process 2. Preventing a useless consumption of materials 3. Proper purchase of materials |
123.53 | 114.7 | 92.8% | B |
| 3 “Resource Saving” 1% increase in a high rate of a good product (Average in the past 2 years:1- the number of defective products/the number of produced items) Unit (ppm-9,900) |
1. Reducing the amount of defective components in processing process 2. Preventing waste processing such as too much production |
13.58 | 13.03 | 95.9% | B |
| 4 “Chemical Substances” 2% reduction in the amount used of chemical substances (dichloromethane)Comparison of the average numbers from 2010 to 2012 Per sales of a million yen Unit (L/M\) |
1. Improvement of detergent products 2. Educational training about cleaning method 3. Pasting up a notice about a target value and achievement status |
2.43 | 2.35 | 103.4% | A |
| 5 “Awareness-Raising Activities“ Cleaning/beautification activities in/around plants Implementing environmental events (implementing every month, and joining in event at least 2 times per year) |
1. cleaning and beautification in/around plants, such as cleaning and weeding 2. Planning an event. 3. joining in administrative /regional events |
12 times | 12 times, and 6 events | 100% | A |
Some examples of specific environment improvement activities
- We adopted a demand management system in order to reduce electricity consumption.
- In manufacturing department, we strove to reduce waste of materials by implementing “reducing defective products” activities. Also, we implemented stock adjustment.
- In order to reduce chemical substances (dichloromethane), we asked our subcontractors to stop re-cleaning process, check cleaning condition, and follow the manuals.
- -1. We monthly cleaned around/inside the factories.
-2. We implemented re-coating of floors in Yagi plant 4 times per year.
Status of compliance, litigations, and complaints
About environment related regulations, we investigated which regulations we need to obey, and checked if everyone follows them. In addition, we submitted the report of environment preservation activities.
Then, we did not receive any complaints nor litigations from other organizations and citizens.
